Filters
General Healthcare
Adhesives/Sealants - Medtech8Additives37Coatings/Dispersions - Medtech15Fluids - Medtech4Foams - Medtech1Inks - Medtech6High Consistency Rubbers - Medtech31Low Viscosity Elastomers - Medtech12Liquid Silicone Rubbers - Medtech17Primers - Medtech9Pressure Sensitive Adhesives - Medtech3Soft Silicone Adhesives5Greases - Medtech4
Refine results
General healthcare
Product
Product Type
Description
High Consistency Rubbers - Medtech
A unique three-part system, VersaSil3 offers the flexibility of adjustable cure rate and table life for various fabrication requirements
High tear strength, wide processing parameters, and translucent, non-tacky surfaces
Developed to be compounded with the inhibitor CAT-40 and the platinum catalyst CAT-55. Advantages include: no volatile by-products, lower cure temperature, and optional post-cure
100: 1.0: 1.0 Mix Ratio
High tear strength, wide processing parameters, and translucent, non-tacky surfaces
Developed to be compounded with the inhibitor CAT-40 and the platinum catalyst CAT-55. Advantages include: no volatile by-products, lower cure temperature, and optional post-cure
100: 1.0: 1.0 Mix Ratio
Additives
A green, single component masterbatch, with the consistency of a clay like material
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)
Coatings/Dispersions - Medtech
The silicone is polydimethylsiloxane polymer that cures at ambient room temperature and adheres to various substrates
Cures at room temperature upon exposure to atmospheric moisture
Cures at room temperature upon exposure to atmospheric moisture
Adhesives/Sealants - Medtech
Two-part, translucent, thixotropic, high tear strength silicone systems
MED1-4013 and MED3-4013 cure at room temperature and all three cure rapidly with the application of heat in an oven, or by a heat gun or lamp
Many bonding applications do not require the use of a silicone primer for suitable adhesion
Tin-free, does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
MED1-4013 has a work time of ~15 minutes, MED2-4013 has a minimum work time of 15 hours, and MED3-4013 has a minimum work time of 60 minutes
MED1-4013 & MED3-4013 cure in less than 24 hours at room temperature
MED1-4013 and MED3-4013 cure at room temperature and all three cure rapidly with the application of heat in an oven, or by a heat gun or lamp
Many bonding applications do not require the use of a silicone primer for suitable adhesion
Tin-free, does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
MED1-4013 has a work time of ~15 minutes, MED2-4013 has a minimum work time of 15 hours, and MED3-4013 has a minimum work time of 60 minutes
MED1-4013 & MED3-4013 cure in less than 24 hours at room temperature
High Consistency Rubbers - Medtech
Uncatalyzed, vinyl-functional, high consistency silicone elastomer
Medium durometer
Requires the addition of a peroxide catalyst to accomplish vulcanization
Strained through a 400-mesh screen (minimum)
Medium durometer
Requires the addition of a peroxide catalyst to accomplish vulcanization
Strained through a 400-mesh screen (minimum)
Low Viscosity Elastomers - Medtech
A very soft two-part, low viscosity, silicone elastomer
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Low Viscosity Elastomers - Medtech
A two-part, low viscosity, translucent silicone elastomer
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Liquid Silicone Rubbers - Medtech
Two-part, white silicone system used with
injection molding equipmentCures with heat via addition-cure chemistry Designed to resist blocking on molded parts
caused by radiation sterilization1:1 Mix Ratio (Part A: Part B)
injection molding equipmentCures with heat via addition-cure chemistry Designed to resist blocking on molded parts
caused by radiation sterilization1:1 Mix Ratio (Part A: Part B)
Additives
A yellow, single component master-batch, with the consistency of a clay like material
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 biological testing (reference Biological Testing Data Table)
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 biological testing (reference Biological Testing Data Table)
Primers - Medtech
Specially formulated primer
One-component primer supplied in VM&P Naphtha requires no mixing
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems where conventional silicone primers are insufficient
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste
One-component primer supplied in VM&P Naphtha requires no mixing
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems where conventional silicone primers are insufficient
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste