Filters
General Healthcare
Adhesives/Sealants - Medtech8Additives37Coatings/Dispersions - Medtech15Fluids - Medtech4Foams - Medtech1Inks - Medtech6High Consistency Rubbers - Medtech31Low Viscosity Elastomers - Medtech12Liquid Silicone Rubbers - Medtech17Primers - Medtech9Pressure Sensitive Adhesives - Medtech3Soft Silicone Adhesives5Greases - Medtech4
Refine results
General healthcare
Product
Product Type
Description
High Consistency Rubbers - Medtech
Two-part silicone elastomer system
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Coatings/Dispersions - Medtech
Two-part medium viscosity silicone elastomer dispersed in heptane
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Coatings/Dispersions - Medtech
The silicone is polydimethylsiloxane polymer that cures at ambient room temperature and adheres to various substrates
Cures at room temperature upon exposure to atmospheric moisture
Cures at room temperature upon exposure to atmospheric moisture
Soft Silicone Adhesives
A clear silicone gel
100% silicone solids (solvent-less)
A low viscosity liquid that cures to a soft, high tack silicone gel
1:1 Mix Ratio (Part A: Part B)
Supported with applicable biological testing
100% silicone solids (solvent-less)
A low viscosity liquid that cures to a soft, high tack silicone gel
1:1 Mix Ratio (Part A: Part B)
Supported with applicable biological testing
Soft Silicone Adhesives
A clear, tacky silicone gel
A medium viscosity liquid that cures to a soft silicone
1:1 Mix Ratio (Part A:B)
A medium viscosity liquid that cures to a soft silicone
1:1 Mix Ratio (Part A:B)
Soft Silicone Adhesives
A clear, tacky silicone gel
A medium viscosity liquid that cures to a soft, high penetration silicone
1:1 Mix Ratio (Part A: Part B)
A medium viscosity liquid that cures to a soft, high penetration silicone
1:1 Mix Ratio (Part A: Part B)
Soft Silicone Adhesives
Clear, tacky, firm silicone gel
Easy mixing two-component, medium viscosity system
1:1 Mix Ratio (Part A:B)
Easy mixing two-component, medium viscosity system
1:1 Mix Ratio (Part A:B)
Adhesives/Sealants - Medtech
Two-part, translucent, thixotropic, high tear strength silicone systems
MED1-4013 and MED3-4013 cure at room temperature and all three cure rapidly with the application of heat in an oven, or by a heat gun or lamp
Many bonding applications do not require the use of a silicone primer for suitable adhesion
Tin-free, does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
MED1-4013 has a work time of ~15 minutes, MED2-4013 has a minimum work time of 15 hours, and MED3-4013 has a minimum work time of 60 minutes
MED1-4013 & MED3-4013 cure in less than 24 hours at room temperature
MED1-4013 and MED3-4013 cure at room temperature and all three cure rapidly with the application of heat in an oven, or by a heat gun or lamp
Many bonding applications do not require the use of a silicone primer for suitable adhesion
Tin-free, does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
MED1-4013 has a work time of ~15 minutes, MED2-4013 has a minimum work time of 15 hours, and MED3-4013 has a minimum work time of 60 minutes
MED1-4013 & MED3-4013 cure in less than 24 hours at room temperature
Adhesives/Sealants - Medtech
Two-part, translucent, thixotropic, high tear strength silicone systems
MED1-4013 and MED3-4013 cure at room temperature and all three cure rapidly with the application of heat in an oven, or by a heat gun or lamp
Many bonding applications do not require the use of a silicone primer for suitable adhesion
Tin-free, does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
MED1-4013 has a work time of ~15 minutes, MED2-4013 has a minimum work time of 15 hours, and MED3-4013 has a minimum work time of 60 minutes
MED1-4013 & MED3-4013 cure in less than 24 hours at room temperature
MED1-4013 and MED3-4013 cure at room temperature and all three cure rapidly with the application of heat in an oven, or by a heat gun or lamp
Many bonding applications do not require the use of a silicone primer for suitable adhesion
Tin-free, does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
MED1-4013 has a work time of ~15 minutes, MED2-4013 has a minimum work time of 15 hours, and MED3-4013 has a minimum work time of 60 minutes
MED1-4013 & MED3-4013 cure in less than 24 hours at room temperature
Adhesives/Sealants - Medtech
Two-part, translucent, thixotropic, high tear strength silicone system
Cures at room temperature and will cure rapidly with the application of heat in an oven, or by a heat gun or lamp
Many bonding applications do not require the use of a silicone primer for suitable adhesion
Tin-free, does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Consistency allows product to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
Work time of ~ 15 minutes
Cures in less than 24 hours at room temperature
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures at room temperature and will cure rapidly with the application of heat in an oven, or by a heat gun or lamp
Many bonding applications do not require the use of a silicone primer for suitable adhesion
Tin-free, does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Consistency allows product to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
Work time of ~ 15 minutes
Cures in less than 24 hours at room temperature
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Soft Silicone Adhesives
A two-part platinum, addition cured, low viscosity liquid that cures to a soft silicone gel suitable for applications requiring temporary adhesion.
100% silicone solids (solvent-less)
1:1 Mix Ratio (Part A: Part B)
Supported with applicable biological testing
100% silicone solids (solvent-less)
1:1 Mix Ratio (Part A: Part B)
Supported with applicable biological testing
Primers - Medtech
Specially formulated primer
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems
One-component primer supplied in Isopropyl Alcohol requires no mixing
Flash Point (TCC) of 12°C (53°F)
Convenient container sizes yield less waste
Lower Volatile Organic Compound (VOC) content
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems
One-component primer supplied in Isopropyl Alcohol requires no mixing
Flash Point (TCC) of 12°C (53°F)
Convenient container sizes yield less waste
Lower Volatile Organic Compound (VOC) content
Primers - Medtech
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems where conventional silicone primers are insufficient
One-component primer supplied in VM&P Naphtha requires no mixing
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste
One-component primer supplied in VM&P Naphtha requires no mixing
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste
Primers - Medtech
Specially formulated primer
One-component primer supplied in VM&P Naphtha requires no mixing
Easy to use, air-drying, one-part primer designed for use with condensation cured systems where conventional silicone primers are insufficient
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste
One-component primer supplied in VM&P Naphtha requires no mixing
Easy to use, air-drying, one-part primer designed for use with condensation cured systems where conventional silicone primers are insufficient
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste
Primers - Medtech
Specially formulated primer
One-component primer supplied in VM&P Naphtha requires no mixing
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems where conventional silicone primers are insufficient
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste
One-component primer supplied in VM&P Naphtha requires no mixing
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems where conventional silicone primers are insufficient
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste
Primers - Medtech
Specialty formulated primer
One-component primer supplied in VM&P Naphtha requires no mixing
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems on polycarbonates
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste
One-component primer supplied in VM&P Naphtha requires no mixing
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems on polycarbonates
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste