EPM-2420 LOW VOLATILITY GENERAL PURPOSE SILICONE ADHESIVE
Description
- Two-part, clear silicone system
- Incorporates an adhesion promoter
- Low viscosity
- 1:1 Mix Ratio (Part A: Part B)
Applications
- To provide protection of electric components and assemblies against shock, vibration, moisture, dust, chemicals and other environmental hazards
- Ideal for applications where clarity and low viscosity are important
- For applications requiring low volatility
- Use to adhere covers onto housings or for any application where grooves and other configurations require a material that self levels
Product Details
| PROPERTY | AVERAGE RESULT |
|---|---|
| Cure System | Platinum |
| Viscosity | 2,600 cP (2,600 mPa*s) |
| Durometer | 30 Type A |
| Tensile | 425 psi (2.93 MPa) |
| Elongation | 150 % |
| Appearance | Clear |
| Cure | 1 minutes / 65 °C |
| Ionic Content Cl | <2 ppm |
| Ionic Content K | <1 ppm |
| Ionic Content Na | <8 ppm |
| Mix Ratio | 1:1 |
| Specific Gravity | 1.01 |
| Volatile Content | 0.85 % |
| Comment | Clear, self leveling and good adhesion to various plastics. |
Encapsulation Technology
Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please Contact NuSil for assistance and recommendations in establishing limits for product specifications.
Speak with an Expert
Our NuSil team is ready to collaborate with you to find the right silicone solution for your application