R-1130 NON-CORROSIVE RTV SILICONE ADHESIVE/SEALANT
Description
- One-part, translucent, non-slumping RTV silicone adhesive
- Based on a dimethyl silicone polymer
- Non-corrosive cure
- Shelf-life stability
- Rapid curing
- Excellent electrical insulation properties
Applications
- As a sealing and caulking, adhesive or potting material for environmental protection of electronic assemblies and components where a non-corrosive cure is essential
- As a coating for semi-conductors and integrated circuits
- As an adhesive/sealant for electrical wires, terminals, mounting resistors and connectors
- Ideal for overhead or side wall applications due to its non-slumping characteristics
Product Details
| PROPERTY | AVERAGE RESULT |
|---|---|
| Cure System | Oxime |
| Extrusion Rate | 70 g/minute |
| Lap Shear | 485 psi (3.34 MPa) |
| Durometer | 35 Type A |
| Appearance | Translucent |
| Cure | 7 days / RTV |
| Elongation | 325 % |
| Flow Rate | 0.5 in (12.7 mm) |
| Mix Ratio | 1 PART |
| Non Volatile Content | 100 % |
| Specific Gravity | 1.1 |
| Tack Free Time | 25 minutes |
| Tear | 40 ppi (7.05 kN/m) |
| Tensile | 850 psi (5.86 MPa) |
| Comment | Non-slump. Adhesive for a variety of substrates on or near electronic components. 485 psi (3.6 MPa), primed (SP-120) lap shear. |
Encapsulation Technology
Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please Contact NuSil for assistance and recommendations in establishing limits for product specifications.
Speak with an Expert
Our NuSil team is ready to collaborate with you to find the right silicone solution for your application