Filters
All
Adhesives/Sealants - Medtech22Additives71Coatings/Dispersions - Medtech27Elastomer Gels1Encapsulation Technology1Fluids - Medtech7Foams - Medtech2Gels - Medtech5Inks - Medtech6High Consistency Rubbers - Medtech48Low Viscosity Elastomers - Medtech23Liquid Silicone Rubbers - Medtech37Primers - Medtech9Pressure Sensitive Adhesives - Medtech3Soft Silicone Adhesives5Specialty Fluids1Greases - Medtech4
Refine results
Product
Product Type
Description
Additives
A black, single component masterbatch, with the consistency of a clay like material
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Coatings/Dispersions - Medtech
One-part RTV silicone elastomer dispersed in xylene
Cures at room temperature upon exposure to atmospheric moisture
Cures at room temperature upon exposure to atmospheric moisture
Gels - Medtech
A high purity, clear silicone gel manufactured under controlled conditions
Easy mixing two-component, low viscosity system
1:1 Mix Ratio (Part A: Part B)
Easy mixing two-component, low viscosity system
1:1 Mix Ratio (Part A: Part B)
Low Viscosity Elastomers - Medtech
A two-part, translucent silicone elastomer system
Cures at room temperature. Cure rate may be accelerated with heat.
Platinum addition cure
1:1 Mix Ratio (Part A: Part B)
Cures at room temperature. Cure rate may be accelerated with heat.
Platinum addition cure
1:1 Mix Ratio (Part A: Part B)
Additives
A single component masterbatch, with the consistency of a low viscosity paste
A masterbatch consisting of ammonium bicarbonate dispersed in a vinyldimethyl-terminated polydimethylsiloxane polymer
A masterbatch consisting of ammonium bicarbonate dispersed in a vinyldimethyl-terminated polydimethylsiloxane polymer
Liquid Silicone Rubbers - Medtech
Two-part, translucent silicone system used with injection molding equipment
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Liquid Silicone Rubbers - Medtech
Two-part, translucent silicone system designed for use with injection molding equipment
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Adhesives/Sealants - Medtech
One part, low slump, solvent-free translucent silicone
Cures at room temperature upon exposure to atmospheric moisture
Cures at room temperature upon exposure to atmospheric moisture
Soft Silicone Adhesives
A two-part platinum, addition cured, low viscosity liquid that cures to a soft silicone gel suitable for applications requiring temporary adhesion.
100% silicone solids (solvent-less)
1:1 Mix Ratio (Part A: Part B)
Supported with applicable biological testing
100% silicone solids (solvent-less)
1:1 Mix Ratio (Part A: Part B)
Supported with applicable biological testing
High Consistency Rubbers - Medtech
Uncatalyzed, vinyl-functional, high consistency silicone elastomer
Requires addition of a peroxide catalyst for vulcanization
Strained through a 400-mesh screen (minimum)
Requires addition of a peroxide catalyst for vulcanization
Strained through a 400-mesh screen (minimum)