Filters
Applied Filters
Medical Implants
Refine results
Product
Product Type
Description
Coatings/Dispersions - Medtech
Two-part, low viscosity, heat curable silicone dispersion
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Low Viscosity Elastomers - Medtech
A two-part, translucent pourable silicone elastomer
Cures with heat via addition-cure chemistry
10:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
10:1 Mix Ratio (Part A: Part B)
Low Viscosity Elastomers - Medtech
Two-part, optically clear, solvent free, low viscosity silicone elastomer
Cures with heat via addition-cure chemistry
10:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
10:1 Mix Ratio (Part A: Part B)
Liquid Silicone Rubbers - Medtech
Two-part, white silicone system designed for use with injection molding equipment
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
High tear strength
Designed to resist blocking and rehealing that otherwise might be induced by the radiation sterilization of molded parts.
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
High tear strength
Designed to resist blocking and rehealing that otherwise might be induced by the radiation sterilization of molded parts.
Liquid Silicone Rubbers - Medtech
Two-part, translucent silicone system designed for use with injection molding equipment
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Liquid Silicone Rubbers - Medtech
Two-part, translucent silicone system designed for use with injection molding equipment
Rapid cure with no post-cure required
1:1 Mix Ratio (Part A: Part B)
Rapid cure with no post-cure required
1:1 Mix Ratio (Part A: Part B)
High Consistency Rubbers - Medtech
Two-part, high consistency silicone elastomer
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
High Consistency Rubbers - Medtech
Two-part, low tension set silicone elastomer
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Primers - Medtech
Specially formulated primer
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems
One-component primer supplied in Isopropyl Alcohol requires no mixing
Flash Point (TCC) of 12°C (53°F)
Convenient container sizes yield less waste
Lower Volatile Organic Compound (VOC) content
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems
One-component primer supplied in Isopropyl Alcohol requires no mixing
Flash Point (TCC) of 12°C (53°F)
Convenient container sizes yield less waste
Lower Volatile Organic Compound (VOC) content
Inks - Medtech
One-part, flowable silicone elastomer dispersion
Cures at room temperature upon exposure to atmospheric moisture
Non-corrosive cure system
Cures at room temperature upon exposure to atmospheric moisture
Non-corrosive cure system