Filters
All
Adhesives/Sealants - Medtech22Additives71Coatings/Dispersions - Medtech27Elastomer Gels1Encapsulation Technology1Fluids - Medtech7Foams - Medtech2Gels - Medtech5Inks - Medtech6High Consistency Rubbers - Medtech48Low Viscosity Elastomers - Medtech23Liquid Silicone Rubbers - Medtech37Primers - Medtech9Pressure Sensitive Adhesives - Medtech3Soft Silicone Adhesives5Specialty Fluids1Greases - Medtech4
Refine results
Product
Product Type
Description
Additives
A yellow, single component master-batch, with the consistency of a low viscosity paste
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)
High Consistency Rubbers - Medtech
Two-part silicone elastomer system
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Additives
A white, single component masterbatch, with the consistency of a clay like material
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)
Coatings/Dispersions - Medtech
Two-part medium viscosity silicone elastomer dispersed in heptane
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Specialty Fluids
Film Forming
Semi-occlusive
High Purity; <0.05% D4 cyclic content
Delivers a rich feel and a powdery after-feel
Helps in pigment dispersion
Increased substantivity without Cyclopentasiloxane
Increased shine
Semi-occlusive
High Purity; <0.05% D4 cyclic content
Delivers a rich feel and a powdery after-feel
Helps in pigment dispersion
Increased substantivity without Cyclopentasiloxane
Increased shine
Coatings/Dispersions - Medtech
One-part acetoxy cured silicone elastomer dispersed in TertButyl Acetate
Cures to a thin silicone film that decreases the coefficient of friction (CoF) compared to the uncoated silicone and increases abrasion resistance for moving, sliding, and rubbing parts
A non-blocking topcoat for silicone surfaces that is easy to clean and prevents the accumulation of dirt, dust and foreign debris
Cures at room temperature upon exposure to atmospheric moisture
Cures to a thin silicone film that decreases the coefficient of friction (CoF) compared to the uncoated silicone and increases abrasion resistance for moving, sliding, and rubbing parts
A non-blocking topcoat for silicone surfaces that is easy to clean and prevents the accumulation of dirt, dust and foreign debris
Cures at room temperature upon exposure to atmospheric moisture
Low Viscosity Elastomers - Medtech
A two-part, translucent silicone elastomer system
Cures rapidly at room temperature
Platinum addition cure
1:1 Mix Ratio (Part A: Part B)
Cures rapidly at room temperature
Platinum addition cure
1:1 Mix Ratio (Part A: Part B)
High Consistency Rubbers - Medtech
Uncatalyzed, vinyl-functional, high consistency silicone elastomer
Low durometer
Requires the addition of a peroxide catalyst to accomplish vulcanization
Strained through a 400-mesh screen (minimum)
Low durometer
Requires the addition of a peroxide catalyst to accomplish vulcanization
Strained through a 400-mesh screen (minimum)
Low Viscosity Elastomers - Medtech
Two-part, pourable, optically clear, silicone elastomer
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)