Filters
All
Adhesives/Sealants - Medtech22Additives71Coatings/Dispersions - Medtech27Elastomer Gels1Encapsulation Technology1Fluids - Medtech7Foams - Medtech2Gels - Medtech5Inks - Medtech6High Consistency Rubbers - Medtech48Low Viscosity Elastomers - Medtech23Liquid Silicone Rubbers - Medtech37Primers - Medtech9Pressure Sensitive Adhesives - Medtech3Soft Silicone Adhesives5Specialty Fluids1Greases - Medtech4
Refine results
Product
Product Type
Description
Inks - Medtech
Strong adhesion to other silicones
Dispersed in Xylene
Accelerated cure with introduction of heat
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Dispersed in Xylene
Accelerated cure with introduction of heat
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Foams - Medtech
Two-part, room temperature curing, silicone foam
Platinum cure
Yields a low density silicone foam when catalyzed
1:1 Mix Ratio (Part A: Part B)
Platinum cure
Yields a low density silicone foam when catalyzed
1:1 Mix Ratio (Part A: Part B)
Liquid Silicone Rubbers - Medtech
Two-part, translucent silicone system used with injection molding equipment
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Adhesives/Sealants - Medtech
One-part, solvent-free silicone
Cures at room temperature upon exposure to atmospheric moisture
Cures at room temperature upon exposure to atmospheric moisture
Additives
An orange, single component masterbatch, with the consistency of a low viscosity paste
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Primers - Medtech
Specially formulated primer
One-component primer supplied in VM&P Naphtha requires no mixing
Easy to use, air-drying, one-part primer designed for use with one and two-part RTV systems where conventional silicone primers are insufficient
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste
One-component primer supplied in VM&P Naphtha requires no mixing
Easy to use, air-drying, one-part primer designed for use with one and two-part RTV systems where conventional silicone primers are insufficient
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste
Liquid Silicone Rubbers - Medtech
Two-part, translucent silicone system designed for use with injection molding equipment
Self-lubricating
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Self-lubricating
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Additives
A orange, single component masterbatch, with the consistency of a low viscosity paste
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)
High Consistency Rubbers - Medtech
High tensile strength, low modulus high consistency silicone rubber
Low tensile set and low hysteresis qualities
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Low tensile set and low hysteresis qualities
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Pressure Sensitive Adhesives - Medtech
One-part, non-curing, pressure sensitive adhesive
Supplied in ethyl acetate
Supplied in ethyl acetate