Filters
All
Adhesives/Sealants - Medtech22Additives71Coatings/Dispersions - Medtech27Elastomer Gels1Encapsulation Technology1Fluids - Medtech7Foams - Medtech2Gels - Medtech5Inks - Medtech6High Consistency Rubbers - Medtech48Low Viscosity Elastomers - Medtech23Liquid Silicone Rubbers - Medtech37Primers - Medtech9Pressure Sensitive Adhesives - Medtech3Soft Silicone Adhesives5Specialty Fluids1Greases - Medtech4
Refine results
Product
Product Type
Description
Adhesives/Sealants - Medtech
Two-part, translucent, thixotropic, high tear strength silicone systems
MED1-4213 and MED3-4213 cure at room temperature and all three cure rapidly with the application of heat in an oven, or by a heat gun or lamp
Many bonding applications do not require the use of a silicone primer for suitable adhesion
Tin-free, does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
MED1-4213 and MED3-4213 cure at room temperature and all three cure rapidly with the application of heat in an oven, or by a heat gun or lamp
Many bonding applications do not require the use of a silicone primer for suitable adhesion
Tin-free, does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
High Consistency Rubbers - Medtech
A unique three-part system, VersaSil3 offers the flexibility of adjustable cure rate and table life for various fabrication requirements
High tear strength, wide processing parameters, and translucent, non-tacky surfaces
Developed to be compounded with the inhibitor CAT-40 and the platinum catalyst CAT-55. Advantages include: no volatile by-products, lower cure temperature, and optional post-cure
100: 1.0: 1.0 Mix Ratio
High tear strength, wide processing parameters, and translucent, non-tacky surfaces
Developed to be compounded with the inhibitor CAT-40 and the platinum catalyst CAT-55. Advantages include: no volatile by-products, lower cure temperature, and optional post-cure
100: 1.0: 1.0 Mix Ratio
Additives
A white, single component masterbatch, with the consistency of a clay-like material
Consists of Barium Sulfate dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Consists of Barium Sulfate dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Soft Silicone Adhesives
A clear silicone gel
100% silicone solids (solvent-less)
A low viscosity liquid that cures to a soft, high tack silicone gel
1:1 Mix Ratio (Part A: Part B)
Supported with applicable biological testing
100% silicone solids (solvent-less)
A low viscosity liquid that cures to a soft, high tack silicone gel
1:1 Mix Ratio (Part A: Part B)
Supported with applicable biological testing
Low Viscosity Elastomers - Medtech
A solvent free, two-part, translucent silicone system
Viscosity and long work time suitable for automatic dispensing
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Viscosity and long work time suitable for automatic dispensing
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Low Viscosity Elastomers - Medtech
Two-part, pourable, optically clear, silicone elastomer
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Primers - Medtech
Specially formulated primer
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems
One-component primer supplied in Isopropyl Alcohol requires no mixing
Flash Point (TCC) of 12°C (53°F)
Convenient container sizes yield less waste
Lower Volatile Organic Compound (VOC) content
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems
One-component primer supplied in Isopropyl Alcohol requires no mixing
Flash Point (TCC) of 12°C (53°F)
Convenient container sizes yield less waste
Lower Volatile Organic Compound (VOC) content
High Consistency Rubbers - Medtech
A two-part, high consistency elastomer designed for optimal performance in a wide range of applications
Produces a tough, durable, translucent elastomer when thermally cured
Has a non-tacky surface and no volatile byproducts or peroxide residues
Advantages include: lot-to-lot consistency and cost-effectiveness
1:1 Mix Ratio (Part A:B)
Produces a tough, durable, translucent elastomer when thermally cured
Has a non-tacky surface and no volatile byproducts or peroxide residues
Advantages include: lot-to-lot consistency and cost-effectiveness
1:1 Mix Ratio (Part A:B)
Inks - Medtech
One-part, flowable silicone elastomer dispersion
Cures at room temperature upon exposure to atmospheric moisture
Non-corrosive cure system
Cures at room temperature upon exposure to atmospheric moisture
Non-corrosive cure system