Filters
All
Adhesives/Sealants - Medtech22Additives71Coatings/Dispersions - Medtech27Elastomer Gels1Encapsulation Technology1Fluids - Medtech7Foams - Medtech2Gels - Medtech5Inks - Medtech6High Consistency Rubbers - Medtech48Low Viscosity Elastomers - Medtech23Liquid Silicone Rubbers - Medtech37Primers - Medtech9Pressure Sensitive Adhesives - Medtech3Soft Silicone Adhesives5Specialty Fluids1Greases - Medtech4
Refine results
Product
Product Type
Description
Liquid Silicone Rubbers - Medtech
Two-part, translucent silicone system designed for use with injection molding equipment
Rapid cure with no post-cure required
1:1 Mix Ratio (Part A: Part B)
Rapid cure with no post-cure required
1:1 Mix Ratio (Part A: Part B)
Adhesives/Sealants - Medtech
One part, solvent-free silicone
Cures at room temperature upon exposure to atmospheric moisture
Cures at room temperature upon exposure to atmospheric moisture
Coatings/Dispersions - Medtech
Two-part silicone dispersion
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Gels - Medtech
A high purity, clear silicone gel manufactured under controlled conditions
Resists fracturing under stress
Easy mixing, two-component, low viscosity system
1:1 Mix Ratio (Part A: Part B)
Alternate mix ratios may be considered to adjust penetration
Resists fracturing under stress
Easy mixing, two-component, low viscosity system
1:1 Mix Ratio (Part A: Part B)
Alternate mix ratios may be considered to adjust penetration
High Consistency Rubbers - Medtech
A unique three-part system, VersaSil3 offers the flexibility of adjustable cure rate and table life for various fabrication requirements
High tear strength, wide processing parameters, and translucent, non-tacky surfaces
Developed to be compounded with the inhibitor CAT-40 and the platinum catalyst CAT-55. Advantages include: no volatile by-products, lower cure temperature, and optional post-cure
100: 1.0: 1.0 Mix Ratio
High tear strength, wide processing parameters, and translucent, non-tacky surfaces
Developed to be compounded with the inhibitor CAT-40 and the platinum catalyst CAT-55. Advantages include: no volatile by-products, lower cure temperature, and optional post-cure
100: 1.0: 1.0 Mix Ratio
Additives
A green, single component masterbatch, with the consistency of a clay like material
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)
Liquid Silicone Rubbers - Medtech
Two-part, translucent silicone system designed for use with injection molding equipment
Rapid cure with no post-cure required
1:1 Mix Ratio (Part A: Part B)
Rapid cure with no post-cure required
1:1 Mix Ratio (Part A: Part B)
Coatings/Dispersions - Medtech
The silicone is polydimethylsiloxane polymer that cures at ambient room temperature and adheres to various substrates
Cures at room temperature upon exposure to atmospheric moisture
Cures at room temperature upon exposure to atmospheric moisture
Coatings/Dispersions - Medtech
Two-part, low viscosity, heat curable silicone dispersion
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Low Viscosity Elastomers - Medtech
A two-part, translucent pourable silicone elastomer
Cures with heat via addition-cure chemistry
10:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
10:1 Mix Ratio (Part A: Part B)