Additives

A translucent blue, single component masterbatch, with the consistency of a low viscosity paste
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)

High Consistency Rubbers - Medtech

Pre-catalyzed, high consistency elastomer
Medium durometer
Strained through a 400-mesh screen (minimum)

Adhesives/Sealants - Medtech

Two-part, translucent, thixotropic, high tear strength silicone system
Cures at room temperature and will cure rapidly with the application of heat in an oven, or by a heat gun or lamp
Many bonding applications do not require the use of a silicone primer for suitable adhesion
Tin-free, does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Consistency allows product to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
Work time of ~ 15 minutes
Cures in less than 24 hours at room temperature
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)

Liquid Silicone Rubbers - Medtech

Two-part, translucent silicone system designed for use with injection molding equipment
Rapid cure with no post-cure required
1:1 Mix Ratio (Part A: Part B)

Inks - Medtech

Two-part, addition –cure black silicone ink dispersed in xylene
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)