Coatings/Dispersions - Medtech

Two-part silicone dispersion
Cures via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)

Gels - Medtech

A high purity, clear silicone gel manufactured under controlled conditions
Resists fracturing under stress
Easy mixing, two-component, low viscosity system
3:1 Mix Ratio (Part A: Part B)
Alternate mix ratios may be considered to adjust penetration

Coatings/Dispersions - Medtech

The silicone is polydimethylsiloxane polymer that cures at ambient room temperature and adheres to various substrates
Cures at room temperature upon exposure to atmospheric moisture

Low Viscosity Elastomers - Medtech

A two-part, translucent pourable silicone elastomer
Cures with heat via addition-cure chemistry
10:1 Mix Ratio (Part A: Part B)

Adhesives/Sealants - Medtech

Two-part, translucent, thixotropic, high tear strength silicone systems
MED1-4013 and MED3-4013 cure at room temperature and all three cure rapidly with the application of heat in an oven, or by a heat gun or lamp
Many bonding applications do not require the use of a silicone primer for suitable adhesion
Tin-free, does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
MED1-4013 has a work time of ~15 minutes, MED2-4013 has a minimum work time of 15 hours, and MED3-4013 has a minimum work time of 60 minutes
MED1-4013 & MED3-4013 cure in less than 24 hours at room temperature