Filters
All
Adhesives/Sealants - Medtech22Additives71Coatings/Dispersions - Medtech27Elastomer Gels1Encapsulation Technology1Fluids - Medtech7Foams - Medtech2Gels - Medtech5Inks - Medtech6High Consistency Rubbers - Medtech48Low Viscosity Elastomers - Medtech23Liquid Silicone Rubbers - Medtech37Primers - Medtech9Pressure Sensitive Adhesives - Medtech3Soft Silicone Adhesives5Specialty Fluids1Greases - Medtech4
Refine results
Product
Product Type
Description
High Consistency Rubbers - Medtech
Uncatalyzed high consistency elastomer
Catalyze with various peroxides to form a medium durometer rubber
Strained through a 400-mesh screen (minimum)
Catalyze with various peroxides to form a medium durometer rubber
Strained through a 400-mesh screen (minimum)
High Consistency Rubbers - Medtech
Two-part, high tear strength silicone elastomer
Firm silicone
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Firm silicone
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Additives
A white, single component masterbatch, with the consistency of a low viscosity paste
Consists of Barium Sulfate dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Consists of Barium Sulfate dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Coatings/Dispersions - Medtech
One part, RTV silicone dispersion
Cures at room temperature upon exposure to atmospheric moisture
Cures at room temperature upon exposure to atmospheric moisture
High Consistency Rubbers - Medtech
Two-part, ultra high properties silicone elastomer
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Liquid Silicone Rubbers - Medtech
Two-part, translucent, fluorosilicone elastomer used with liquid injection molding equipment100 mol % fluorosiliconeCures with heat via addition-cure chemistry1:1 Mix Ratio (Part A: Part B)
Primers - Medtech
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems where conventional silicone primers are insufficient
One-component primer supplied in VM&P Naphtha requires no mixing
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste
One-component primer supplied in VM&P Naphtha requires no mixing
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste
Low Viscosity Elastomers - Medtech
An optically clear, two-part silicone
A pourable, medium viscosity material
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
A pourable, medium viscosity material
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Liquid Silicone Rubbers - Medtech
Two-part, translucent silicone system designed for use with injection molding equipment
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Liquid Silicone Rubbers - Medtech
Two-part, translucent fluorosilicone elastomer
Cures with heat via addition-cure chemistry
50 mol% fluorosilicone
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
50 mol% fluorosilicone
1:1 Mix Ratio (Part A: Part B)