Liquid Silicone Rubbers - Medtech

Two-part, high clarity silicone system designed for use in injection molding equipment
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)

Encapsulation Technology

Elastomer gel delivered from an hydrophilic gel
Surfactant free, silicone membrane stabilization
Cyclic free
Ease of use and dispersion: directly in the water phase
Light and Smooth feel for aqueous base formulations
Transformable texture: light and watery at the beginning that turns into a matte velvet veil
With carefully controlled conditions, possible to formulate transparent products

High Consistency Rubbers - Medtech

Two-part, high tear strength silicone elastomer
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)

Adhesives/Sealants - Medtech

Two-part, translucent, thixotropic, high tear strength silicone systems
MED1-4013 and MED3-4013 cure at room temperature and all three cure rapidly with the application of heat in an oven, or by a heat gun or lamp
Many bonding applications do not require the use of a silicone primer for suitable adhesion
Tin-free, does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
MED1-4013 has a work time of ~15 minutes, MED2-4013 has a minimum work time of 15 hours, and MED3-4013 has a minimum work time of 60 minutes
MED1-4013 & MED3-4013 cure in less than 24 hours at room temperature

Low Viscosity Elastomers - Medtech

Flowable, two-part, clear, high durometer silicone
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)