Adhesives/Sealants - Medtech

Two-part, translucent, thixotropic, high tear strength silicone systems
MED1-4013 and MED3-4013 cure at room temperature and all three cure rapidly with the application of heat in an oven, or by a heat gun or lamp
Many bonding applications do not require the use of a silicone primer for suitable adhesion
Tin-free, does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
MED1-4013 has a work time of ~15 minutes, MED2-4013 has a minimum work time of 15 hours, and MED3-4013 has a minimum work time of 60 minutes
MED1-4013 & MED3-4013 cure in less than 24 hours at room temperature

High Consistency Rubbers - Medtech

Pre-catalyzed, high consistency elastomer
High durometer
Strained through a 400-mesh screen (minimum)

Liquid Silicone Rubbers - Medtech

Two-part, translucent silicone system used with injection molding equipment
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)

Additives

A translucent dark blue, single component masterbatch, with the consistency of a low viscosity paste
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)

Additives

translucent black, single component masterbatch, with the consistency of a low viscosity paste
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)