Filters
Applied Filters
General Healthcare
Adhesives/Sealants - Medtech8Additives37Coatings/Dispersions - Medtech15Fluids - Medtech4Foams - Medtech1Inks - Medtech6High Consistency Rubbers - Medtech31Low Viscosity Elastomers - Medtech12Liquid Silicone Rubbers - Medtech17Primers - Medtech9Pressure Sensitive Adhesives - Medtech3Soft Silicone Adhesives5Greases - Medtech4
Refine results
Product
Product Type
Description
High Consistency Rubbers - Medtech
Uncatalyzed, vinyl-functional, high consistency silicone elastomer
Medium durometer
Requires the addition of a peroxide catalyst to accomplish vulcanization
Strained through a 400-mesh screen (minimum)
Medium durometer
Requires the addition of a peroxide catalyst to accomplish vulcanization
Strained through a 400-mesh screen (minimum)
Low Viscosity Elastomers - Medtech
A very soft two-part, low viscosity, silicone elastomer
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Low Viscosity Elastomers - Medtech
A two-part, low viscosity, translucent silicone elastomer
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Liquid Silicone Rubbers - Medtech
Two-part, white silicone system used with
injection molding equipmentCures with heat via addition-cure chemistry Designed to resist blocking on molded parts
caused by radiation sterilization1:1 Mix Ratio (Part A: Part B)
injection molding equipmentCures with heat via addition-cure chemistry Designed to resist blocking on molded parts
caused by radiation sterilization1:1 Mix Ratio (Part A: Part B)
Additives
A yellow, single component master-batch, with the consistency of a clay like material
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 biological testing (reference Biological Testing Data Table)
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 biological testing (reference Biological Testing Data Table)
Adhesives/Sealants - Medtech
One-part, translucent, self-leveling silicone adhesive
Cures at room temperature upon exposure to atmospheric moisture
Supplied ready to use in Semco® cartridges
Cures at room temperature upon exposure to atmospheric moisture
Supplied ready to use in Semco® cartridges
Liquid Silicone Rubbers - Medtech
Two-part, translucent silicone system used with injection molding equipment
Cures with heat via addition-cure chemistry
Rapid cure with no post-cure required
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
Rapid cure with no post-cure required
1:1 Mix Ratio (Part A: Part B)
Additives
A violet, single component masterbatch, with the consistency of a clay like material
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)
Fluids - Medtech
A clear liquid trifluoroprophylmethylsiloxane to provide lubricious and/or hydrophobic coating, for lubricating the surfaces of molded dimethyl silicone elastomer parts
Available in standard viscosities of : 350 cP, 1,000 cP, and 12,500 cP.
Custom viscosities available upon request
Available in standard viscosities of : 350 cP, 1,000 cP, and 12,500 cP.
Custom viscosities available upon request
Coatings/Dispersions - Medtech
One-part RTV silicone elastomer dispersed in xylene.
Cures at room temperature upon exposure to atmospheric moisture
Cures at room temperature upon exposure to atmospheric moisture