Filters
Applied Filters
Medical Implants
Refine results
Product
Product Type
Description
Fluids - Medtech
A clear liquid trifluoroprophylmethylsiloxane to provide lubricious and/or hydrophobic coating, for lubricating the surfaces of molded dimethyl silicone elastomer parts
Available in standard viscosities of : 350 cP, 1,000 cP, and 12,500 cP.
Custom viscosities available upon request
Available in standard viscosities of : 350 cP, 1,000 cP, and 12,500 cP.
Custom viscosities available upon request
Liquid Silicone Rubbers - Medtech
Two-part, translucent silicone system designed for use with injection molding equipment
Rapid cure with no post-cure required
1:1 Mix Ratio (Part A: Part B)
Rapid cure with no post-cure required
1:1 Mix Ratio (Part A: Part B)
Inks - Medtech
One-part, flowable silicone elastomer dispersion
Cures at room temperature upon exposure to atmospheric moisture
Non-corrosive cure system
Cures at room temperature upon exposure to atmospheric moisture
Non-corrosive cure system
Additives
A green, single component masterbatch, with the consistency of a clay like material
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)
Additives
A black, single component masterbatch, with the consistency of a low viscosity paste
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Low Viscosity Elastomers - Medtech
Pourable, optically clear, two-part silicone elastomer
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Liquid Silicone Rubbers - Medtech
Two-part, translucent, fluorosilicone elastomer used with liquid injection molding equipment
100 mol % fluorosilicone
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
100 mol % fluorosilicone
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Fluids - Medtech
A clear liquid copolymer consisting of dimethylsiloxane and trifluoropropylmethylsilane to provide a lubricous and/or hydrophobic coating, for lubricating the surfaces of molded dimethyl silicone elastomer parts
Available in standard viscosities of: 350 cP, 1,000 cP, and 12,500 cP
Custom viscosities available upon request
Available in standard viscosities of: 350 cP, 1,000 cP, and 12,500 cP
Custom viscosities available upon request
High Consistency Rubbers - Medtech
Uncatalyzed, vinyl-functional, high consistency silicone elastomer
Medium durometer
Requires the addition of a peroxide catalyst to accomplish vulcanization
Strained through a 400-mesh screen (minimum)
Medium durometer
Requires the addition of a peroxide catalyst to accomplish vulcanization
Strained through a 400-mesh screen (minimum)
High Consistency Rubbers - Medtech
Two-part silicone elastomer system
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)