Additives

A translucent black, single component masterbatch, with the consistency of a low viscosity paste
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems

Low Viscosity Elastomers - Medtech

Flowable, two-part, clear, high durometer silicone
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)

Primers - Medtech

Specially formulated primer
One-component primer supplied in VM&P Naphtha requires no mixing
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems where conventional silicone primers are insufficient
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste

Adhesives/Sealants - Medtech

Two-part, translucent, thixotropic, high tear strength silicone systems
MED1-4213 and MED3-4213 cure at room temperature and all three cure rapidly with the application of heat in an oven, or by a heat gun or lamp
Many bonding applications do not require the use of a silicone primer for suitable adhesion
Tin-free, does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol

High Consistency Rubbers - Medtech

Pre-catalyzed, high consistency elastomer
High durometer
Strained through a 400-mesh screen (minimum)