Filters
Applied Filters
General Healthcare
Adhesives/Sealants - Medtech8Additives37Coatings/Dispersions - Medtech15Fluids - Medtech4Foams - Medtech1Inks - Medtech6High Consistency Rubbers - Medtech31Low Viscosity Elastomers - Medtech12Liquid Silicone Rubbers - Medtech17Primers - Medtech9Pressure Sensitive Adhesives - Medtech3Soft Silicone Adhesives5Greases - Medtech4
Refine results
Product
Product Type
Description
High Consistency Rubbers - Medtech
Uncatalyzed, vinyl-functional, high consistency silicone elastomer
Medium durometer
Requires the addition of a peroxide catalyst to accomplish vulcanization
Strained through a 400-mesh screen (minimum)
Medium durometer
Requires the addition of a peroxide catalyst to accomplish vulcanization
Strained through a 400-mesh screen (minimum)
Low Viscosity Elastomers - Medtech
A very soft two-part, low viscosity, silicone elastomer
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Low Viscosity Elastomers - Medtech
A two-part, low viscosity, translucent silicone elastomer
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Liquid Silicone Rubbers - Medtech
Two-part, white silicone system used with
injection molding equipmentCures with heat via addition-cure chemistry Designed to resist blocking on molded parts
caused by radiation sterilization1:1 Mix Ratio (Part A: Part B)
injection molding equipmentCures with heat via addition-cure chemistry Designed to resist blocking on molded parts
caused by radiation sterilization1:1 Mix Ratio (Part A: Part B)
Additives
A yellow, single component master-batch, with the consistency of a clay like material
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 biological testing (reference Biological Testing Data Table)
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 biological testing (reference Biological Testing Data Table)
Additives
A translucent green, single component masterbatch, with the consistency of a low viscosity paste
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Supported by USP Class VI and ISO 10993 Biological testing (reference Biological Testing Data Table)
Primers - Medtech
Specially formulated primer
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems
One-component primer supplied in Isopropyl Alcohol requires no mixing
Flash Point (TCC) of 12°C (53°F)
Convenient container sizes yield less waste
Lower Volatile Organic Compound (VOC) content
Easy to use, air-drying, one-part primer designed for use with platinum-cured systems
One-component primer supplied in Isopropyl Alcohol requires no mixing
Flash Point (TCC) of 12°C (53°F)
Convenient container sizes yield less waste
Lower Volatile Organic Compound (VOC) content
High Consistency Rubbers - Medtech
A two-part, high consistency elastomer designed for optimal performance in a wide range of applications
Produces a tough, durable, translucent elastomer when thermally cured
Has a non-tacky surface and no volatile byproducts or peroxide residues
Advantages include: lot-to-lot consistency and cost-effectiveness
1:1 Mix Ratio (Part A:B)
Produces a tough, durable, translucent elastomer when thermally cured
Has a non-tacky surface and no volatile byproducts or peroxide residues
Advantages include: lot-to-lot consistency and cost-effectiveness
1:1 Mix Ratio (Part A:B)
Fluids - Medtech
A clear polydimethylsiloxane liquid to provide a lubricious and/or hydrophobic coating
Available in custom viscosities of 100 – 100,000 cP
Has controlled volatility, lubrication characteristics and low surface tension
Standard viscosities of 100, 350, 1000, and 12,500 cP
Available in custom viscosities of 100 – 100,000 cP
Has controlled volatility, lubrication characteristics and low surface tension
Standard viscosities of 100, 350, 1000, and 12,500 cP
Liquid Silicone Rubbers - Medtech
Two-part, high clarity silicone system designed for use in injection molding equipment
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)