Filters
All
Adhesives/Sealants - Medtech22Additives71Coatings/Dispersions - Medtech27Elastomer Gels1Encapsulation Technology1Fluids - Medtech7Foams - Medtech2Gels - Medtech5Inks - Medtech6High Consistency Rubbers - Medtech48Low Viscosity Elastomers - Medtech23Liquid Silicone Rubbers - Medtech37Primers - Medtech9Pressure Sensitive Adhesives - Medtech3Soft Silicone Adhesives5Specialty Fluids1Greases - Medtech4
Refine results
Product
Product Type
Description
Additives
An orange, single component masterbatch, with the consistency of a low viscosity paste
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Primers - Medtech
Specially formulated primer
One-component primer supplied in VM&P Naphtha requires no mixing
Easy to use, air-drying, one-part primer designed for use with one and two-part RTV systems where conventional silicone primers are insufficient
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste
One-component primer supplied in VM&P Naphtha requires no mixing
Easy to use, air-drying, one-part primer designed for use with one and two-part RTV systems where conventional silicone primers are insufficient
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste
Pressure Sensitive Adhesives - Medtech
One-part, non-curing, pressure sensitive adhesive
Supplied in ethyl acetate
Supplied in ethyl acetate
Low Viscosity Elastomers - Medtech
Two-part, translucent, pourable silicone elastomer
Offers high tear strength and excellent physical properties
Cures with heat via addition-cure chemistry
10:1 Mix Ratio (Part A: Part B)
Offers high tear strength and excellent physical properties
Cures with heat via addition-cure chemistry
10:1 Mix Ratio (Part A: Part B)
Fluids - Medtech
A clear polydimethylsiloxane liquid to provide lubricious and/or hydrophobic coating
Available in standard viscosities of 100, 350, 1000 and 12,500 cP
Custom viscosities available upon request
Available in standard viscosities of 100, 350, 1000 and 12,500 cP
Custom viscosities available upon request
High Consistency Rubbers - Medtech
A two-part, high consistency elastomer designed for optimal performance in a wide range of applications
Produces a tough, durable, translucent elastomer when thermally cured
Has a non-tacky surface and no volatile byproducts or peroxide residues
Advantages include: lot-to-lot consistency and cost-effectiveness
1:1 Mix Ratio (Part A:B)
Produces a tough, durable, translucent elastomer when thermally cured
Has a non-tacky surface and no volatile byproducts or peroxide residues
Advantages include: lot-to-lot consistency and cost-effectiveness
1:1 Mix Ratio (Part A:B)
Coatings/Dispersions - Medtech
Fully compounded, platinum-catalyzed, dimethyl-methylvinyl siloxane elastomers dispersed in xylene
Excellent physical properties
Usable life can be extended with refrigeration
Excellent physical properties
Usable life can be extended with refrigeration
High Consistency Rubbers - Medtech
Two-part, high durometer, tear resistant silicone elastomer
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Low Viscosity Elastomers - Medtech
Optically clear, two-component silicone elastomer
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
High Consistency Rubbers - Medtech
Two-part, low tension set silicone elastomer
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)