Filters
Applied Filters
Medical Implants
Refine results
Product
Product Type
Description
Additives
An orange, single component masterbatch, with the consistency of a low viscosity paste
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Consists of pigment dispersed in a vinyl-functional silicone polymer which covalently bonds into the matrix of platinum-cured silicone systems
Primers - Medtech
Specially formulated primer
One-component primer supplied in VM&P Naphtha requires no mixing
Easy to use, air-drying, one-part primer designed for use with one and two-part RTV systems where conventional silicone primers are insufficient
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste
One-component primer supplied in VM&P Naphtha requires no mixing
Easy to use, air-drying, one-part primer designed for use with one and two-part RTV systems where conventional silicone primers are insufficient
Flash Point (TCC) of 17°C (63°F)
Convenient container sizes yield less waste
Low Viscosity Elastomers - Medtech
Pourable, optically clear, two-part silicone elastomer
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Liquid Silicone Rubbers - Medtech
Two-part, translucent, fluorosilicone elastomer used with liquid injection molding equipment
100 mol % fluorosilicone
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
100 mol % fluorosilicone
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Fluids - Medtech
A clear liquid copolymer consisting of dimethylsiloxane and trifluoropropylmethylsilane to provide a lubricous and/or hydrophobic coating, for lubricating the surfaces of molded dimethyl silicone elastomer parts
Available in standard viscosities of: 350 cP, 1,000 cP, and 12,500 cP
Custom viscosities available upon request
Available in standard viscosities of: 350 cP, 1,000 cP, and 12,500 cP
Custom viscosities available upon request
High Consistency Rubbers - Medtech
Uncatalyzed, vinyl-functional, high consistency silicone elastomer
Medium durometer
Requires the addition of a peroxide catalyst to accomplish vulcanization
Strained through a 400-mesh screen (minimum)
Medium durometer
Requires the addition of a peroxide catalyst to accomplish vulcanization
Strained through a 400-mesh screen (minimum)
High Consistency Rubbers - Medtech
Two-part silicone elastomer system
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
1:1 Mix Ratio (Part A: Part B)
Liquid Silicone Rubbers - Medtech
Two-part, translucent silicone system designed for use with injection molding equipment
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)
Fluids - Medtech
A clear polydimethylsiloxane liquid to provide lubricious and/or hydrophobic coating
Available in standard viscosities of 100, 350, 1000 and 12,500 cP
Custom viscosities available upon request
Available in standard viscosities of 100, 350, 1000 and 12,500 cP
Custom viscosities available upon request