Filters
Applied Filters
All
Adhesives/Sealants - Aerospace/Defense74Coatings/Dispersions - Aerospace/Defense22Electrically Conductive/Static Dissipative15Fluids - Aerospace/Defense5Foams - Aerospace/Defense6Gels - Aerospace/Defense19Greases - Aerospace/Defense7Inks - Aerospace/Defense9Liquid Silicone Rubbers - Aerospace/Defense1Low Viscosity Elastomers - Aerospace/Defense21Pressure Sensitive Adhesives - Aerospace/Defense4Primers - Aerospace/Defense9Resins1Specialty Polymers13Thermally Conductive24
Refine results
Product
Product Type
Description
Foams - Aerospace/Defense
Two-part, RTV silicone foam
Yields a low density silicone rubber foam when catalyzed
100:6 Mix Ratio (Base: Catalyst)
Yields a low density silicone rubber foam when catalyzed
100:6 Mix Ratio (Base: Catalyst)
Adhesives/Sealants - Aerospace/Defense
Two-part, thixotropic, red RTV silicone
100:0.5 Mix Ratio (Base: Curing Agent)
100:0.5 Mix Ratio (Base: Curing Agent)
Adhesives/Sealants - Aerospace/Defense
A translucent, one-part, RTV silicone
100 mol % fluorosilicone
100 mol % fluorosilicone
Thermally Conductive
Two-part, white, thermally conductive silicone
Cure may be heat accelerated
15:1 Mix Ratio (Part A: Part B)
Cure may be heat accelerated
15:1 Mix Ratio (Part A: Part B)
Gels - Aerospace/Defense
High purity, optically clear, soft silicone gel
Medium viscosity components can be blended in a convenient 1:1 ratio by weight or volume
Cures at room temperature in 24 hours
1.54 refractive index
Good UV Resistance
Good adhesion without the use of primer
Medium viscosity components can be blended in a convenient 1:1 ratio by weight or volume
Cures at room temperature in 24 hours
1.54 refractive index
Good UV Resistance
Good adhesion without the use of primer
Coatings/Dispersions - Aerospace/Defense
One-part RTV silicone elastomer dispersed in tert butyl acetate
Based on a fluorosilicone copolymer
Based on a fluorosilicone copolymer
Thermally Conductive
Two-part, white, thermally conductive silicone
Cures with the addition of heat
Designed to allow bond line thicknesses ? 50 microns
20:1 Mix Ratio (Part A:Part B)
Cures with the addition of heat
Designed to allow bond line thicknesses ? 50 microns
20:1 Mix Ratio (Part A:Part B)
Specialty Polymers
A solvent-free, thermosetting resin
Forms a transparent, rigid material that retains its cured properties over a broad temperature range (up to 300°C/570°F)
Has good dielectric properties at high temperatures and humidity
Excellent resistance to radiation
100:1 Mix Ratio (CF-4721:Dicumyl Peroxide)
Forms a transparent, rigid material that retains its cured properties over a broad temperature range (up to 300°C/570°F)
Has good dielectric properties at high temperatures and humidity
Excellent resistance to radiation
100:1 Mix Ratio (CF-4721:Dicumyl Peroxide)
Adhesives/Sealants - Aerospace/Defense
A translucent, one-part, RTV silicone
Based on a fluorosilicone polymer
Based on a fluorosilicone polymer