Filters
Applied Filters
All
Adhesives/Sealants - Aerospace/Defense74Coatings/Dispersions - Aerospace/Defense22Electrically Conductive/Static Dissipative15Fluids - Aerospace/Defense5Foams - Aerospace/Defense6Gels - Aerospace/Defense19Greases - Aerospace/Defense7Inks - Aerospace/Defense9Liquid Silicone Rubbers - Aerospace/Defense1Low Viscosity Elastomers - Aerospace/Defense21Pressure Sensitive Adhesives - Aerospace/Defense4Primers - Aerospace/Defense9Resins1Specialty Polymers13Thermally Conductive24
Refine results
Product
Product Type
Description
Primers - Aerospace/Defense
Specially formulated primer designed for use with platinum-cured systems where conventional silicone primers are insufficient
One-component primer supplied in VM&P Naphtha requires no mixing
Air-drying
Convenient container sizes produce less waste
One-component primer supplied in VM&P Naphtha requires no mixing
Air-drying
Convenient container sizes produce less waste
Low Viscosity Elastomers - Aerospace/Defense
Two part, Clear, 1:1 Mix ratio (A:B)
Pourable and self-leveling
Cures at room temperature
REACh and RoHS compliant
Tested per UL-94 and passed V-1
Pourable and self-leveling
Cures at room temperature
REACh and RoHS compliant
Tested per UL-94 and passed V-1
Thermally Conductive
Two-part, white, flowable, thermally conductive silicone
Cures with the addition of heat
10:1 Mix Ratio (Part A:Part B)
Cures with the addition of heat
10:1 Mix Ratio (Part A:Part B)
Thermally Conductive
Two-part, white, thermally conductive silicone
Cure may be heat accelerated
15:1 Mix Ratio (Part A:Part B)
Cure may be heat accelerated
15:1 Mix Ratio (Part A:Part B)
Gels - Aerospace/Defense
A two-part encapsulation gel
A 1.43 refractive index
1:1 Mix Ratio (Part A:B)
A 1.43 refractive index
1:1 Mix Ratio (Part A:B)
Thermally Conductive
Two-part, white, thermally conductive silicone
Cures with the addition of heat
Designed to allow bond line thicknesses 50 microns
20:1 Mix Ratio (Part A:Part B)
Cures with the addition of heat
Designed to allow bond line thicknesses 50 microns
20:1 Mix Ratio (Part A:Part B)
Inks - Aerospace/Defense
One part, flowable silicone elastomer dispersion
Cures in 7 days at room temperature when exposed to atmospheric moisture
Non-corrosive cure system
The R-1008 series is available in Translucent (-0), White (-1), Black (-2), Red (-3), Orange (-4), Yellow (-5), Green (-6), Blue (-7), Violet (-8)
Cures in 7 days at room temperature when exposed to atmospheric moisture
Non-corrosive cure system
The R-1008 series is available in Translucent (-0), White (-1), Black (-2), Red (-3), Orange (-4), Yellow (-5), Green (-6), Blue (-7), Violet (-8)
Adhesives/Sealants - Aerospace/Defense
Two-part, black silicone system
Offers a high tear strength, good physical properties and a broad operating temperature range
Convenient 1:1 mix ratio (Part A: Part B)
Offers a high tear strength, good physical properties and a broad operating temperature range
Convenient 1:1 mix ratio (Part A: Part B)
Foams - Aerospace/Defense
Yields a medium density, flame retardant silicone foam when catalyzed
Mix in a convenient 1:1 ratio with a black Part A and white Part B for easy identification and mixing
Cures to an elastomeric foam
Increased work time over other foams
Mix in a convenient 1:1 ratio with a black Part A and white Part B for easy identification and mixing
Cures to an elastomeric foam
Increased work time over other foams