Filters
Applied Filters
All
Adhesives/Sealants - Aerospace/Defense74Coatings/Dispersions - Aerospace/Defense22Electrically Conductive/Static Dissipative15Fluids - Aerospace/Defense5Foams - Aerospace/Defense6Gels - Aerospace/Defense19Greases - Aerospace/Defense7Inks - Aerospace/Defense9Liquid Silicone Rubbers - Aerospace/Defense1Low Viscosity Elastomers - Aerospace/Defense21Pressure Sensitive Adhesives - Aerospace/Defense4Primers - Aerospace/Defense9Resins1Specialty Polymers13Thermally Conductive24
Refine results
Product
Product Type
Description
Inks - Aerospace/Defense
One part, flowable silicone elastomer dispersion
Cures in 7 days at room temperature when exposed to atmospheric moisture
Non-corrosive cure system
The R-1008 series is available in Translucent (-0), White (-1), Black (-2), Red (-3), Orange (-4), Yellow (-5), Green (-6), Blue (-7), Violet (-8)
Cures in 7 days at room temperature when exposed to atmospheric moisture
Non-corrosive cure system
The R-1008 series is available in Translucent (-0), White (-1), Black (-2), Red (-3), Orange (-4), Yellow (-5), Green (-6), Blue (-7), Violet (-8)
Coatings/Dispersions - Aerospace/Defense
One Part RTV silicone elastomer dispersed in Tert Butyl Acetate
100 mole % fluorosilicone
Federal Color Standard 27925 (White)
100 mole % fluorosilicone
Federal Color Standard 27925 (White)
Adhesives/Sealants - Aerospace/Defense
Two-part film adhesive
Cures at room temperature or rapidly with heat
Cures at room temperature or rapidly with heat
Gels - Aerospace/Defense
Two-part, clear silicone gel
Designed for enhanced performance in extreme low and high temperatures
1:1 Mix Ratio (Part A: Part B)
Designed for enhanced performance in extreme low and high temperatures
1:1 Mix Ratio (Part A: Part B)
Low Viscosity Elastomers - Aerospace/Defense
Two-part, clear silicone system
Offers low modulus and low viscosity
1:1 Mix Ratio (Part A: Part B)
RoHS compliant
Offers low modulus and low viscosity
1:1 Mix Ratio (Part A: Part B)
RoHS compliant
Low Viscosity Elastomers - Aerospace/Defense
Solvent-free, low viscosity, clear, two-part silicone elastomer
Accelerated cure rate with heat
Based on a dimethyl diphenyl silicone copolymer
10:1 Mix Ratio (Part A:B)
Accelerated cure rate with heat
Based on a dimethyl diphenyl silicone copolymer
10:1 Mix Ratio (Part A:B)
Resins
A pre-catalyzed, solvent free, thermosetting resin
Forms a transparent rigid material when heat cured
Maintains cured properties and good electrical properties over a broad temperature range and in high humidity
Forms a transparent rigid material when heat cured
Maintains cured properties and good electrical properties over a broad temperature range and in high humidity
Thermally Conductive
Two-part, white, thermally conductive, low viscosity silicone
elastomer
Cures with the addition of heat
1:1 Mix Ratio (Part A: Part B)
elastomer
Cures with the addition of heat
1:1 Mix Ratio (Part A: Part B)
Low Viscosity Elastomers - Aerospace/Defense
Two-part, pourable, optically clear, silicone
1:1 Mix Ratio (Part A:B)
1:1 Mix Ratio (Part A:B)