Filters
Applied Filters
All
Adhesives/Sealants - Aerospace/Defense74Coatings/Dispersions - Aerospace/Defense22Electrically Conductive/Static Dissipative15Fluids - Aerospace/Defense5Foams - Aerospace/Defense6Gels - Aerospace/Defense19Greases - Aerospace/Defense7Inks - Aerospace/Defense9Liquid Silicone Rubbers - Aerospace/Defense1Low Viscosity Elastomers - Aerospace/Defense21Pressure Sensitive Adhesives - Aerospace/Defense4Primers - Aerospace/Defense9Resins1Specialty Polymers13Thermally Conductive24
Refine results
Product
Product Type
Description
Pressure Sensitive Adhesives - Aerospace/Defense
One-part, non-curing, pressure sensitive adhesive
Dispersed in ethyl acetate
Dispersed in ethyl acetate
Adhesives/Sealants - Aerospace/Defense
Two-part, red, pourable silicone system
10:1 Mix Ratio (Part A:B)
Cures at room temperature or rapidly with heat
High tear strength and good physical properties
10:1 Mix Ratio (Part A:B)
Cures at room temperature or rapidly with heat
High tear strength and good physical properties
Adhesives/Sealants - Aerospace/Defense
One-Part, translucent, self-leveling RTV silicone
High extrusion rate
High extrusion rate
Primers - Aerospace/Defense
Specially formulated primer designed for use with platinum-cured systems where conventional silicone primers are insufficient
Translucent to preserve visibility with translucent products
One-component primers supplied in VM&P Naphtha require no mixing
Air-drying
Convenient container sizes produce less waste
Translucent to preserve visibility with translucent products
One-component primers supplied in VM&P Naphtha require no mixing
Air-drying
Convenient container sizes produce less waste
Adhesives/Sealants - Aerospace/Defense
A translucent, one-part, RTV silicone
Based on a 100 mole % fluorosilicone polymer
Based on a 100 mole % fluorosilicone polymer
Adhesives/Sealants - Aerospace/Defense
One-part, black, platinum catalyzed silicone Glob-Top
Thixotropic consistency
Thixotropic consistency
Coatings/Dispersions - Aerospace/Defense
A one-part, RTV silicone dispersion with a non-corrosive cure
Supplied pre-dispersed at 60% solids in xylene
Available with the addition of UV tracer to facilitate easier QC inspection
Supplied pre-dispersed at 60% solids in xylene
Available with the addition of UV tracer to facilitate easier QC inspection
Electrically Conductive/Static Dissipative
Two-part, black, static dissipative RTV silicone
1: 1 Mix Ratio (Part A: B)
1: 1 Mix Ratio (Part A: B)
Low Viscosity Elastomers - Aerospace/Defense
A two-part silicone system
Provided in mix and dispense applicators
1:1 Mix Ratio (Part A:B)
Provided in mix and dispense applicators
1:1 Mix Ratio (Part A:B)