Filters
Applied Filters
All
Adhesives/Sealants - Aerospace/Defense74Coatings/Dispersions - Aerospace/Defense22Electrically Conductive/Static Dissipative15Fluids - Aerospace/Defense5Foams - Aerospace/Defense6Gels - Aerospace/Defense19Greases - Aerospace/Defense7Inks - Aerospace/Defense9Liquid Silicone Rubbers - Aerospace/Defense1Low Viscosity Elastomers - Aerospace/Defense21Pressure Sensitive Adhesives - Aerospace/Defense4Primers - Aerospace/Defense9Resins1Specialty Polymers13Thermally Conductive24
Refine results
Product
Product Type
Description
Adhesives/Sealants - Aerospace/Defense
One-Part, translucent silicone RTV
Non-slumping in thin sections
Non-slumping in thin sections
Specialty Polymers
Peroxide catalyst masterbatch for use with high consistency silicone systems
Di(2,4-dichlorobenzoyl)peroxide at 50% concentration in silicone oil
Di(2,4-dichlorobenzoyl)peroxide at 50% concentration in silicone oil
Electrically Conductive/Static Dissipative
Two-part, black, static dissipative RTV silicone
Based on a methyl silicone polymer
Supplied in a convenient 1:1 mix ratio for use with automatic mix and dispense equipment
Based on a methyl silicone polymer
Supplied in a convenient 1:1 mix ratio for use with automatic mix and dispense equipment
Adhesives/Sealants - Aerospace/Defense
One-part, self-leveling, solvent-free silicone material
Cures at room temperature upon exposure to atmospheric moisture
Cures at room temperature upon exposure to atmospheric moisture
Pressure Sensitive Adhesives - Aerospace/Defense
One-part, non-curing, pressure sensitive adhesive
Electrically Conductive/Static Dissipative
Two-part, tan-colored electrically conductive silicone
20:1 Mix Ratio (Part A:B)
20:1 Mix Ratio (Part A:B)
Specialty Polymers
Pendent methylhydrosiloxane - dimethylsiloxane co-polymer crosslinker
CAS # 68037-59-2
CAS # 68037-59-2
Inks - Aerospace/Defense
One part, flowable silicone elastomer dispersion
Cures in 7 days at room temperature when exposed to atmospheric moisture
Non-corrosive cure system
The R-1008 series is available in Translucent (-0), White (-1), Black (-2), Red (-3), Orange (-4), Yellow (-5), Green (-6), Blue (-7), Violet (-8)
Cures in 7 days at room temperature when exposed to atmospheric moisture
Non-corrosive cure system
The R-1008 series is available in Translucent (-0), White (-1), Black (-2), Red (-3), Orange (-4), Yellow (-5), Green (-6), Blue (-7), Violet (-8)
Foams - Aerospace/Defense
Yields a low to medium density silicone rubber foam when rapidly catalyzed
Low viscosity
1:10 Mix Ratio (Part A: Part B)
Low viscosity
1:10 Mix Ratio (Part A: Part B)