Filters
Applied Filters
All
Adhesives/Sealants - Aerospace/Defense74Coatings/Dispersions - Aerospace/Defense22Electrically Conductive/Static Dissipative15Fluids - Aerospace/Defense5Foams - Aerospace/Defense6Gels - Aerospace/Defense19Greases - Aerospace/Defense7Inks - Aerospace/Defense9Liquid Silicone Rubbers - Aerospace/Defense1Low Viscosity Elastomers - Aerospace/Defense21Pressure Sensitive Adhesives - Aerospace/Defense4Primers - Aerospace/Defense9Resins1Specialty Polymers13Thermally Conductive24
Refine results
Product
Product Type
Description
Gels - Aerospace/Defense
A two-part, encapsulation gel
Extended work time
1:1 Mix Ratio (Part A:B)
Extended work time
1:1 Mix Ratio (Part A:B)
Inks - Aerospace/Defense
One part, flowable silicone elastomer dispersion
Cures in 7 days at room temperature when exposed to atmospheric moisture
Non-corrosive cure system
The R-1008 series is available in Translucent (-0), White (-1), Black (-2), Red (-3), Orange (-4), Yellow (-5), Green (-6), Blue (-7), Violet (-8)
Cures in 7 days at room temperature when exposed to atmospheric moisture
Non-corrosive cure system
The R-1008 series is available in Translucent (-0), White (-1), Black (-2), Red (-3), Orange (-4), Yellow (-5), Green (-6), Blue (-7), Violet (-8)
Primers - Aerospace/Defense
Specially formulated primer designed for use with platinum-cured systems where conventional silicone primers are insufficient
Colored red to provide easy visual determination of surface coverage
One-component primer supplied in Isopropyl Alcohol requires no mixing
Air-drying
Convenient container sizes produce less waste
Lower Volatile Organic Component (VOC) content
Colored red to provide easy visual determination of surface coverage
One-component primer supplied in Isopropyl Alcohol requires no mixing
Air-drying
Convenient container sizes produce less waste
Lower Volatile Organic Component (VOC) content
Greases - Aerospace/Defense
Thermally conductive, white silicone grease
Excellent resistance to moisture, ozone and oxidation over a wide temperature range
Excellent resistance to moisture, ozone and oxidation over a wide temperature range
Thermally Conductive
Two part, Gray, 1:1 Mix ratio (A:B)
Pourable and self-leveling
Cures at room temperature
REACh and RoHS compliant
Pourable and self-leveling
Cures at room temperature
REACh and RoHS compliant
Foams - Aerospace/Defense
Yields a medium density, silicone foam when catalyzed
Two Parts mix in a convenient 1:1 ratio with a black Part A and white Part B to ensure homogeneous mixtures
Two Parts mix in a convenient 1:1 ratio with a black Part A and white Part B to ensure homogeneous mixtures
Adhesives/Sealants - Aerospace/Defense
Two-part, translucent, pourable silicone system
10:1 Mix Ratio (Part A:B)
Cures at room temperature or rapidly with heat
High tear strength and good physical properties
10:1 Mix Ratio (Part A:B)
Cures at room temperature or rapidly with heat
High tear strength and good physical properties
Adhesives/Sealants - Aerospace/Defense
Two-part, gray silicone adhesive system
Cures at room temperature or rapidly by applying heat in an oven or by a heat gun or lamp
Does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Product available in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
1:1 Mix Ratio (Part A: Part B)
Cures at room temperature or rapidly by applying heat in an oven or by a heat gun or lamp
Does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Product available in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
1:1 Mix Ratio (Part A: Part B)