Filters
Applied Filters
All
Adhesives/Sealants - Aerospace/Defense74Coatings/Dispersions - Aerospace/Defense22Electrically Conductive/Static Dissipative15Fluids - Aerospace/Defense5Foams - Aerospace/Defense6Gels - Aerospace/Defense19Greases - Aerospace/Defense7Inks - Aerospace/Defense9Liquid Silicone Rubbers - Aerospace/Defense1Low Viscosity Elastomers - Aerospace/Defense21Pressure Sensitive Adhesives - Aerospace/Defense4Primers - Aerospace/Defense9Resins1Specialty Polymers13Thermally Conductive24
Refine results
Product
Product Type
Description
Gels - Aerospace/Defense
A two-part optically clear gel
A 1.43 refractive index at 589 nm
1:1 Mix Ratio (Part A:B)
A 1.43 refractive index at 589 nm
1:1 Mix Ratio (Part A:B)
Adhesives/Sealants - Aerospace/Defense
Two-part, white, thixotropic, high tear strength silicone system
Cures at room temperature or rapidly with the application of heat in an oven, or by a heat gun or lamp
Primer is not required for many bonding applications
Does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
1:1 Mix Ratio (Part A: Part B)
Cures at room temperature or rapidly with the application of heat in an oven, or by a heat gun or lamp
Primer is not required for many bonding applications
Does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
1:1 Mix Ratio (Part A: Part B)
Inks - Aerospace/Defense
One part, flowable silicone elastomer dispersion
Cures in 7 days at room temperature when exposed to atmospheric moisture
Non-corrosive cure system
The R-1008 series is available in Translucent (-0), White (-1), Black (-2), Red (-3), Orange (-4), Yellow (-5), Green (-6), Blue (-7), Violet (-8)
Cures in 7 days at room temperature when exposed to atmospheric moisture
Non-corrosive cure system
The R-1008 series is available in Translucent (-0), White (-1), Black (-2), Red (-3), Orange (-4), Yellow (-5), Green (-6), Blue (-7), Violet (-8)
Inks - Aerospace/Defense
One part, flowable silicone elastomer dispersion
Cures in 7 days at room temperature when exposed to atmospheric moisture
Non-corrosive cure system
The R-1008 series is available in Translucent (-0), White (-1), Black (-2), Red (-3), Orange (-4), Yellow (-5), Green (-6), Blue (-7), Violet (-8)
Cures in 7 days at room temperature when exposed to atmospheric moisture
Non-corrosive cure system
The R-1008 series is available in Translucent (-0), White (-1), Black (-2), Red (-3), Orange (-4), Yellow (-5), Green (-6), Blue (-7), Violet (-8)
Fluids - Aerospace/Defense
A clear trimethyl endblocked polysiloxane fluid
Available in viscosities up to 7 million centipoise, and higher viscosities on a special order basis
Use of a proprietary catalyst during polymerization offers improved thermal stability
Available in viscosities up to 7 million centipoise, and higher viscosities on a special order basis
Use of a proprietary catalyst during polymerization offers improved thermal stability
Gels - Aerospace/Defense
High purity, optically clear, firm silicone gel
Two medium viscosity components blend easily in a convenient 1:1 ratio by weight or volume
Two medium viscosity components blend easily in a convenient 1:1 ratio by weight or volume
Adhesives/Sealants - Aerospace/Defense
Two-part, electrically conductive RTV silicone colored green-gray
Maintains electric conductivity over a broad operating temperature range
100:0.5 Mix Ratio (Base: Curing Agent)
Designed for enhanced performance in extreme low and high temperatures
Maintains electric conductivity over a broad operating temperature range
100:0.5 Mix Ratio (Base: Curing Agent)
Designed for enhanced performance in extreme low and high temperatures
Thermally Conductive
A two-part, thixotropic compound
15:1 Mix Ratio (Part A:B)
Provides thermal conductivity when cured
Cures at room or temperature or rapidly with heat
15:1 Mix Ratio (Part A:B)
Provides thermal conductivity when cured
Cures at room or temperature or rapidly with heat